Use and Care Manual

HOW TO USE

Speed control

Turn the position switch to select the speed.The numbers0,1,2 ,3,4and 5 on the board

represents power off.

Oscillation

Press switch to ON and the fan begins to shake head.Press switch to OFF and the fan

stops to shake head.

Tilting adjustment

Always switch the fan off before Making a tilt adjustment, the air Flow can be adjusted

upward or Downward by simply moving the Guard up or down

Do not touch the blades with your hands or with any hard object when the fan blade are in

motion.

USER SERVICING INSTRUCTIONS

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by

pulling on cord

2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards

blades, (see fig.11)

3. Remove fuse carefully. Remove the fuse by prying it out carefully, (see fig.12)

4. Risk of fire. Replace fuse only with 5Amp max, 125 Volt fuse.

5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug, (see

fig.13).

6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should

not be removed. Discard product if the attachment plug is damaged.

Fig: 11 Fig:12 Fig:13

Tips: Do not overexert when replacing the fuse or damage may occur. If it's hard to close

the access cover, make sure the fuse is fully inserted.

CLEANING:

1.Be sure to unplug from the electrical supply source before cleaning.

2.Plastic parts should be cleaned with mild soap and damp cloth or sponge. Thoroughly

remove soap film with clean water.

3.Be sure not to get water or other liquid into the motor.