User Manual

4-4 ADS TRITON+ Manual
connection with the SIM provider. Consult ADS Client Services for
more information on using private addresses. Then, the user can
connect to a monitor through Qstart, or ADS hosted systems
software (provided the appropriate LIF has been imported).
Consult the Qstart online help for further information on wireless
setup and use.
Currently, dynamic IP SIM cards may be used only for uploading
data wirelessly from the monitor to an FTP site or an ADS Web-
based software database. Communicating directly through ADS
software to set up and activate monitors equipped with dynamic IP
SIM cards must occur over a direct connection using the ADS USB
Serial Interface cable (ADS p/n 8000-0337).
Direct communication with a TRITON+ monitor configured with a
dynamic IP SIM card requires the ADS IS USB serial interface
cable (ADS p/n 8000-0337). Indirect communication can occur
through the FTP Operations device (refer to Chapter 6,
Configuration and Activation, for more information). Using this
device enables you to activate the monitor, upgrade the firmware,
and upload data through the Qstart software.