User Manual

1-8 ADS TRITON+ Manual
Maintenance Restrictions
As mentio ned earlier, all ADS TRITON+ flow monitors are
manufactured to meet IS standards. The monitor’s IS certification
can be voided instantly if proper maintenance and service
procedures are not followed. ADS must restr ic t c e rtain
maintenance tasks to ADS IS -certified technicians.
ADS-certified technicians carefully inspect and d ocument their
repairs of IS monitors. This inspection and d ocumentation process
provides legal protection should the monitor's performance or safety
be in question.
If you experience trouble with this equipment, please re fer to this
manual for troub leshoo ting guidelines. The fo llowing maintenanc e
procedures may be performed in the field, b ut they must be
performed as described in this manual:
 Installing and swapping monitor
 Installing and swapping sensors
 Installing and swapping battery pack
 Swapping fuses in po wer regulator in monitor
 Installing and swapping SIM card on monitor port
 Replacing pressure depth sensor dryer tube and desiccant beads
 Installing and swapping ExPAC (applicable only when not
housed within an XBUS or XIO), XBUS, or XIO
 Cleaning sensors
 Confirming sensors
Note: Please note that, in all applications, only ADS IS-
certified Service Technicians are authorized to per form
component-level ser vice on the TRITON+.
If you have any questions abo ut the procedures, warranty
information, or level of service you are allowed to perform on a