User Manual

1-14 ADS TRITON+ Manual
 The equip ment is only certified for use in ambient temperatures
in the r ange of -20
o
C to +60
o
C and should not be used outside
this range.
 The certificate number has an ‘X’ suffix, which indicates that
special conditions apply to installation and use. Those
installing or inspecting this equipment must have access to the
contents of the certificate.
 Installation shall be carried out in accordance with the
applicable code of practice by suitab ly-trained personnel.
 Repair of this equipment shall be carried out in accordance
with the applicable code of practice.
 If the equipment is likely to c ome into contact with aggressive
substances, then it is the responsibility of the user to take
suitable preca utions that pr e vent it from being adversely
affected, thus e nsuring that the type of protection is not
compromised.
 Aggr essive substances such as acidic liquids or gases that
may attack metals, or solvents that may affect p o lymeric
materials
 Suitable precautions such as regular checks as part of
rout ine inspec tions or establishing from the materia l’s data
sheet that it is resistant to specific chemicals
 There are no special inspections or maintenance conditions
other than a periodic check.
 TRITON+ monitors delivered outside the U. S. must bear the
following label to substantiate conformance to ATEX a n d CSA
standards as certified through Sira Certification Services: