User Manual

Configura tion and Activation 6-43
 Electronic Offset Enter the difference that exists between
the pressure depth readings and the value equal to the pipe
height minus the physical offset of the Surface Combo Sensor.
However, ADS recommends leaving this value at zero.
 Store Data Se lect this checkbox to e nsure the monitor logs
pressure depth data to memory. This option is selected by
default.
Temperature tab – Surface Combo
Edit the parameters corresponding to the temperature senso r in the
Surface Combo Sensor in the same way in which you edited the
parameters for the temperature sensor in the Peak Combo Sensor.
Refer to the parameter descriptions and instructions for the
Temperature tab on page 6-25 for detailed information on the
individual parameters on the Temperature tab.