User Manual

Modbus 9-3
ExPAC
RS-485 TERMINAL
CONNECTOR
RS-485 term i nal connector on ExPAC
2. (applicable only when the ExPAC is housed within an XBUS or
other enclosure) Open the door of the enclosure , and r un the
cable through the appr opriate entry point into the enclosure.
For an XBUS, this entry point will be the left cable g land at the
bottom of the enclosure. You may need to loosen the plastic
nut on the cable gland on the outside of the XBUS or other
enclosure to feed the cable through.