User Manual

10-6 ADS TRITON+ Manual
monitor top for 1 to 2 seconds and then removing the magnet from
the top. The sequence cannot begin until the magnet is removed.
Proper locat i on for magnet on monitor top
Note: ADS does not recommend initiating the diagnostic
code sequence while codes representing monitor activity
are displaying in the window. Therefore, ver ify that the
LED window is blank before attempting to activate the
code sequence. In addition, make s ure the LED window is
in clear view before initiating the code sequence.
Note: Activating the diagnostic cod es using the magnet
also wakes up and resets the modem in the monitor. When
communication issues ar i se, the monitor often will resume
wir eless communications after the diagnostic co d es are
activated.