User Manual

10-10 ADS TRITON+ Manual
4. Close the Monitor Status window and then click on the green
Hangup button in the Functions section to disco ntinue
communication with the monitor.
Replacing the Monitor Battery Pack
Note: The o nly service or maintenance activities ADS
permits within the monitor chassis are battery pack, battery
PCB, r e gulator /modem unit, and fuse replacement.
Therefore, do not handle, alter, mod ify, remove, or replace
any other compo nents insid e the monitor. Such actions
will void the monitor warranty agreement and the I S
certification.
Warning: The TRITON+ can receive internal power
only from the ADS 12-volt IS battery pack (p/n 8000-
0043-02/04). Do not use any other battery or power
source to power the monitor internally.
ADS offers a replacement 12 -volt battery pack (ADS p/n 8000-
0043-02) to replace the existing battery pack when the battery
voltage is low or falls below the previously specified level.
Replacing the 12-volt battery pack involves a relatively simp le
pro cess.
Note: Battery pack r ep lacement invo lves removing the
existing PCB for reuse with the replacement battery pack.
Therefore, do not discard or replace the PCB unless it is
necessary.