User Manual

In-12 ADS TRITON+ Manual
SCADA
analog outputs, 8-8
connection, 8-8
Modbus, 9-1
Modbus output data registers, 9-11
setup, 6-74
verifying Modbus output data, 6-
74
wireless communication, 9-9
sensitivity, 6-22, 6-33, 6-38
sensor ext ension cables, 3-41
sensor temperature, 6-27, 6-48
sensors, 1-4
1/2-band mount
Peak Combo Sensor, 3-48
1/2-band mount with silt mount
adapter
Peak Combo Sensor, 3-48
3/4-band mount
Peak Combo Sensor, 3-44
3/4-band mount with silt mount
adapter
Peak Combo Sensor, 3-45
cleaning, 10-18
confirmation, 10-4
connecting to the monitor, 3-67
extension cables, 1-4
handling, 10-18
inspection, 10-18
installation, 3-7
ring assembl y, 3-11, 3-23
standard mount, 3-53, 3-55
surcharge mount, 3-59
IS certification, 1-4
monitor ports, 2-7
mounting to the ring, 3-23
overview, 2-15
Peak Combo Sensor, 2-15
Surface Combo Sensor, 2-19
Ultrasonic Depth Sensor, 2-18
part numbers, B-1
Peak Combo Sensor
editi ng devices, 6-16
mounting to the ring, 3-25
mounting to the ring using the
silt mount adapter, 3-25
overview, 2-15
peak veloci ty, 2-17
pressure depth, 2-16
specifications, A-5
troubleshooting peak velocity,
10-50
troubleshooting pressure depth,
10-55
troubleshooting temperature,
10-56
troubleshooting upward
ultrasonic depth, 10-47
upward ultrasonic depth, 2-16
running diagnostics, 6-76
securing cables in the
pipe/manhole, 3-64
securing cables to the band, 3-51
securing cables to the ring, 3-27
securing dryer tube to the monitor,
3-69
special installation, 3-38
parts and supplies, 3-39
Peak Combo Sensor, 3-42
tools, 3-42
specifications
Peak Combo Sensor, A-5
Surface Combo Sensor, A-7
Ultrasonic Depth Sensor, A-9
standard installation, 3-7
mount ing Pea k Combo Sensor
to the ring, 3-25
mounting Peak Combo Sensor
to the ring using the silt
mount adapter, 3-25
mounting sensors to the ring,
3-23
mounting Surface Combo
Sensor to the ring, 3-32