User Manual

Sensor Installation and Connection 3-7
Installing the Sensors in the Pipe
This section includes the procedures for performing sensor
installations using one of the following methods:
 Standard Installations
 Special Installations
Note: When installing a monitor with wireless
communications, it is very important to test the TRITON+
with the SIM card installed to ensure the entire system
functions and to verify network quality of service before
installation. This check should be done before field
deployment and again at the monitoring site before
installing the monitor. Refer to Chapter 4,
Communication, for more information.
Standard Installation
Performing a standard sensor installation involves the following
process:
 Gathering the parts and supplies
 Gathering the tools and equipment
 Assembling the ring
 Mounting the sensors on the ring
 Securing the cables to the ring
 Installing the ring in the pipe