User Manual

3-30 ADS TRITON+ Manual
Proper orientation of the ring with the sensors in the pipe with and without
silt present. Please note that the sensor mounting plate for the Surface
Combo Sensor/Ultrasonic Depth Sensor is centered at the crown of the pipe.
The crank spreader mechanism is offset to the side.
The bottom sensor may be rotated off the bottom
centerline up to 15 degrees (5:30 to 6:30 positions) up
either side of the pipe (without the adapter) or from 15 to
45 degrees (the 6:30 to 7:30 positions) up the left side of
the pipe (with the silt mount adapter). However, rotating
the ring and sensor requires accurately measuring the
physical offset.