Manual

6-84 IETG FlowHawk Manual
Temperature Diagnostics dialog displaying the temperature from the
Temperature 1 device
3. Verify the accuracy of the reading. This reading represents the
water temperature.
4. Click on the Close button to exit the Temperature Diagnostics
dialog and return to the Monitor Diagnostics dialog.
Activating the Monitor
If a change has been made to any of the sensor parameters,
reactivate the monitor through the Diagnostics mode. Do not
reactivate a monitor if no change has been made.
While connected to the monitor, select Activate from the
Functions drop-down list and then select the Perform button.
Select the Disconnect button to discontinue communication with
monitor when finished running diagnostics on the system sensors.