Manual

Data Presentation 5-35

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

Note: IntelliServe performs data averaging for all data entities except

for Rain. Rain is provided as a sum total for the interval.

 None This option graphs each data point within the selected time

interval without performing data averaging.

 15-minute This option averages data on a 15-minute interval.

 Hourly This option averages data on an hourly interval.

 Daily This option averages data on a daily interval.

7. Click on the Get Entities button to display the entities available for the

specified time period.

8. Select the checkboxes corresponding to the entities you want to display on

the table from the Available Data Entities table. You may select up to ten

entities at one time for display. Refer to Appendix B, Data Entities, for

descriptions of the data entities available in IntelliServe.

Note: Several data entities fall under common root entity types and,

therefore, share common root entity names. To expedite and simplify

the entity selection process, the Available Data Entities table lists

these unique root entity names, in place of the individual entity names,

to collectively represent the corresponding entities sharing the common

root names. Selecting a root entity name causes IntelliServe to list all

the data available for the entities associated with that root entity type for

the selected monitoring points. For example, consider IntelliServe

supports several pressure depth entities (such as PDEPTH, PDEPTH_1,

and PDEPTH_2) that share the same root name (PDEPTH), but may

have different identifiers (numbers following the root name).

Consequently, the entity available for selection from the Available

Data Entities table under this configuration would be PDEPTH, but

IntelliServe would list all available PDEPTH, PDEPTH_1, and

PDEPTH_2 data in tabular view.

9. View the data in tabular format based on one of the following options:

 View Choose this button to preview the selected data combined onto a

single report. For example, data for all selected monitoring points will

display on a single report. Use the scroll bars to the right and at the

bottom of the page to scroll through data when more data is selected

than can display on the screen.