Manual

Data Presentation 5-39
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
 None This option graphs each data point for the selected time interval
without performing data averaging.
 15-minute This option averages data on a 15-minute interval.
 Hourly This option averages data on an hourly interval.
 Daily This option averages data on a daily interval.
8. Click the Get Entities button to display the available entities.
9. Select the checkboxes corresponding to the entities you want to display on
the table from the Available Data Entities table. You may select up to ten
entities at one time for display. Refer to Appendix B, Data Entities, for
descriptions of the available data entities.
Note: Several data entities fall under common root entity types and,
therefore, share common root entity names. To expedite and simplify
the entity selection process, the Available Data Entities table lists
these unique root entity names, in place of the individual entity names,
to collectively represent the corresponding entities sharing the common
root names. Selecting a root entity name causes IntelliServe to list all
the data available for the entities associated with that root entity type for
the locations in the selected location group. For example, consider
IntelliServe supports several pressure depth entities (such as PDEPTH,
PDEPTH_1, and PDEPTH_2) that share the same root name
(PDEPTH), but may have different identifiers (numbers following the
root name). Consequently, the entity available for selection from the
Available Data Entities table under this configuration would be
PDEPTH, but IntelliServe would list all available PDEPTH,
PDEPTH_1, and PDEPTH_2 data in tabular view.
10. View the data in tabular format based on one of the following options:
 View Choose this button to preview the selected data combined on a
single report. For example, data for all selected monitoring points will
display on a single report. Use the scroll bars to the right and at the
bottom of the page to scroll through data when more data is selected
than can display on the screen.
 Flip Chart Choose this button when you have selected multiple
monitoring points and want to display each on a separate tabular view.
Use the scroll bars on the right and bottom of the page to scroll through
data when more data is selected than display on the screen. Use the
arrow buttons located in the corners of the window to page through the
different locations.