Manual

Data Presentation 5-57

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

Flow Monitor Pump Times window

4. Verify that the monitoring point selected in the Monitoring Points section

represents the location for which you want to the view data. If the location

has two monitoring points, increase or modify the selections as necessary.

5. Designate the date and time period for which you want to view the pump

time data in the Date Range section.

 Start Date/Time Enter or click on the calendar icon

to select the

starting date of the period for which you want to view data and then

select the associated starting time from the corresponding drop-down

lists.

 End Date/Time Enter or click on the calendar icon

to select the

ending date of the period for which you want to view data and then

select the associated end time from the corresponding drop-down lists.

6. Click on the Get Entities button.

The Available Data Entities section displays the pump time entities from the

selected monitoring point(s) for which data exists in the database for the

selected date/time range. The only entities that may be available for this type of

hydrograph are PUMP_1 through PUMP_8.

Note: Every time you change the date range, you must refresh the list

of entities by clicking on the Get Entities button.