Manual

5-58 IntelliServe



User’s Guide

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

7. Select the checkboxes in the Available Data Entities section corresponding

to the entities for which you want to view pump time data.

8. Select the period over which you want IntelliServe to display the data on

the screen at one time from the Display Format drop-down list.

9. (optional) Select the Tabular Data checkbox to include an option on the

hydrograph(s) for viewing the data in tabular format.

10. Click on the Graph button to display the pump time data on a hydrograph

based on the selected parameters. For multiple monitoring points, you can

select the Flip Chart button instead to view data for each monitoring point

on a separate hydrograph. Otherwise, IntelliServe will display the data for

both monitoring points on one hydrograph.

An IntelliServe Hydrograph dialog displays the selected pump time data in the

chosen format. Use the scroll bar at the bottom of the hydrograph to scroll

through the data if more data has been selected than can display on the screen

at one time. For multiple hydrographs, move between the graphs using the

arrow buttons or by clicking on the number link directly above the hydrograph.

Pump Times graph for selected monitor location

Note: Refer to Hydrograph Display Options beginning on page 5-18

for instructions on toggling between the graphical and tabular views and

customizing, exporting, or printing the graph.