Manual

7-4 IntelliServe



User’s Guide

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

The Add Composite Location dialog displays.

Add Composite Location dialog

10. Select a monitoring point you would like to assign to the composite location

from the Monitoring Point drop-down list.

11. Choose the Add Flow or Subtract Flow radio button for the Flow

Direction to indicate whether to include or exclude all or a portion of the

flow from the selected monitoring point when calculating the total flow for

the composite location. Add or subtract only a portion of the flow from the

selected monitoring point by entering a decimal value that represents a

percentage of the flow in the Multiplier field.

For example, to add only 75 percent of the flow from a specific monitoring

point to the total flow for a composite location, select the Add Flow option

and enter 0.75 in the Multiplier field.

Note: If no multiplier is entered, IntelliServe automatically will apply

a multiplier of 1, which represents either adding or subtracting all the

flow coming from the monitoring point.

12. Click on the Save button.

The monitoring point and settings display on the list of Assigned Monitoring

Points on the Composite Location Parameters window.