Manual

Location Information 7-25
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
4. Click on the Add button in the Adjustment Factors section.
The Add Adjustment Factor dialog displays.
Add Adjustment Factor dialog
5. Select the entity to which you want IntelliServe to apply the adjustment
factor from the Entity drop-down list. DPROCESSED, QFINAL,
QGROSS, and VPROSCESSED are the only entities for which you can
create adjustment factors.
6. Enter a name by which to reference the factor being created in the Factor
Name field.
7. Enter the factor you want IntelliServe to apply to the selected entity’s
readings in graphs and reports in the Factor Value field.
8. Enter or click on the calendar icon
corresponding to the Effective Date
field to designate the date upon which to begin applying the adjustment
factor to the selected entity when generating graphs and reports. Then,
select the hour and minute on the designated date to begin applying the
adjustment factor from the associated drop-down lists. This date and time
correspond to the time stamp of the selected entity’s readings.
9. Click on the Save button.
The Flow Monitor Adjustment Factors screen displays the new adjustment
factor in the Adjustment Factors and Adjustment Factor History sections.
Change the Factor Name of an adjustment factor in the Adjustment Factors
section by clicking on the link corresponding to the associated Entity.