Manual

7-28 IntelliServe

User’s Guide
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
 Repeat the previous 5 procedures in this step for each additional
adjustment factor you want to create for an entity with an existing
factor.
Note: With the appropriate permissions, you can modify an existing
factor value by clicking on the corresponding date and time in the
Effective Date column.
Deleting an Adjustment Factor
Remove an adjustment factor from the IntelliServe database in the following
way:
1. Select Locations > Flow Monitors from the System Menu.
The Flow Monitors window displays.
2. Right-click on the flow monitor for which you want to delete an adjustment
factor(s), and then select the Adjustment Factors option from the menu.
The Flow Monitor Adjustment Factors window displays the adjustment factors
stored in the database for the selected flow monitor.
3. Proceed based on the following conditions:
 Delete individual, but not all, adjustment factors associated
with a single entity
− Select the entity type from the Entity drop-down list in the
Adjustment Factor History section.
− Select the checkboxes corresponding to the factor values you want
to delete from the database, and then select the Delete button.
− Click on the OK button on the confirmation dialog.
 Delete all adjustment factors associated with a single entity
or entities
− In the Adjustment Factors section, select the checkboxes
corresponding to the entities for which you want to delete all the
associated adjustment factors.
− Click on the Delete button.