Manual

Data Presentation 5-11

CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract

13. Select the checkboxes corresponding to the entities you want on the

hydrograph from the Available Data Entities table. Select up to seven

entities at a time to graph.

Note: Several data entities fall under common root entity types and,

therefore, share common root entity names. To expedite and simplify

the entity selection process, the Available Data Entities table lists

these unique root entity names, in place of the individual entity names,

to collectively represent the corresponding entities sharing the common

root names. Selecting a root entity name causes IntelliServe to plot all

the data available for the entities associated with that root entity type for

the selected monitoring points. For example, consider IntelliServe

supports several pressure depth entities (such as PDEPTH, PDEPTH_1,

and PDEPTH_2) that share the same root name (PDEPTH), but may

have different identifiers (numbers following the root name).

Consequently, the entity available for selection from the Available

Data Entities table under this configuration would be PDEPTH, but

IntelliServe would plot all available PDEPTH, PDEPTH_1, and

PDEPTH_2 data on the hydrograph.

14. View any current alarms associated with the selected location in the Active

Alarms section. You can sort the alarms in the table by clicking on the

column headings.

15. Graph the data.

 Graph Choose this button to preview the selected data as a single

graph. For example, if you have selected more than one monitoring

point, data for all selected monitoring points will display on a single

graph. Use the scroll button at the bottom of the page to scroll through

data when more data is selected than can display on the screen.

 Flip Chart Choose this button when you have selected multiple

monitoring points and want to display each on a separate hydrograph.

(This option is not available for a single monitoring point.) Use the

scroll button at the bottom of the graphs to scroll through data when

more data is selected than can display on the screen. Use the arrow

buttons in the corners of the graph window to page through the different

locations.

The hydrograph for the selected location and a summary of the plotted data

appear in a new window.