User Manual

PrimeProbe2 User Manual

3. Insert the two sensor cables through the cable glands into the

termination area of the converter.

4. With the back removed and the terminals exposed, terminate the

appropriate wires at the numbered terminals.

5. To use the pulse output of the PrimeProbe2, connect the

appropriate digital output cable to terminals 16 & 17 (output 1) and

18 & 19 (output 2).

Pulse Output Characteristics

The pulse output has the following technical characteristics:

 Opto-insulated output with floating collector and emitter terminals,

freely connectable

 Maximum switching voltage: 40Vdc