User Manual

PrimeProbe2 User Manual
22
Menu Access System
This section applies only to the remote PrimeProbe2. Navigate through
the menu system using the keypad. The following table describes the 6
key functions:
Short Press <1 Second
 Increases the numeric value or parameter selected
by the cursor
 Goes to the previous item in the menu
Long Press >1 Second
 Decreases the numeric value or parameter selected
by the cursor
 Goes to the next item in the menu
Short Press <1 Second
 Moves the cursor to the right in an input field
 Goes to the next item in the menu
 Changes the display of the process data
Long Press >1 Second
 Moves the cursor to the left in an input field
 Goes to the previous item in the menu
Short press <1 Second
 Enters/edits the selected function
 Enables the Main Menu for system configuration
 Cancels the selected function in progress
Long Press >1 Second
 Exits the current menu
 Confirms/enables the selected function
 Enables Totalizer Reset Request
Factory Presets
The PrimeProbe2 comes from the factory with the following
configuration:
 Dip switches in the OFF position
 Access Code L2 = 00000 (ADS recommends leaving for
PrimeWorks programming)