User Manual

PrimeProbe2 User Manual

down any key on the keypad for more than 1 second. After

releasing the key, characters will appear on the display.

Note: When the display is on, energy save mode goes off,

reducing battery life significantly.

Please keep in mind that even though the display may be OFF, the

PrimeProbe is still in operation and measuring flow. If the PrimeProbe2

will not be used for an extended period of time, place the instrument in

standby mode (described in Stand-by under Diagnostics).

 Quick Start = Allows the user to toggle On or Off the Quick

Start Menu.

 Net Total = Allows the user to turn On or Off the display of Net

Totals.

 Currency = Activates the currency functions. When activated, a

currency value appears on the display in place of the totalizers (i.e.,

a monetary value appears that is equivalent to the totals). This

corresponds to the Partial Totalizers. When the partial totalizers

are reset, the currency totalizers are also reset.

 Curr. Decim. = Allows the user to select the number of decimal

places in the Currency display. Choose from 0 to 3.

Data Logger

PrimeProbe2 does not have an internal data logger. Program the external

data logger separately from the PrimeProbe2 using PrimeWorks software.

This menu exists for possible future functionality.

Diagnostics

 Calibration Allows the user to calibrate the sensor. Press the

Enter key with the cursor on Calibration. Execute? will appear

on the display. Press Enter to confirm, or any other key to cancel

the operation.

 Self Test Allows the user to test all the functions of the

PrimeProbe2, including all the input circuits and the excitation

generator. Initiate the test by pressing the Enter key. When

Execute? appears on the display, press Enter to confirm.

After completion, the results from the test will appear on the

display. This test occurs every time the user turns on (powers up)

the unit.

 Simulation Facilitates flow rate simulation. This function is

useful when testing external units connected to the PrimeProbe2.

Toggle On/Off to start/stop this feature.

 Stand-by Allows the user to place the PrimeProbe2 in standby

mode when it will not be used for an extended period of time. To

activate this function, press the Enter key. When the Execute?