Owner's manual

ADS PrimeWorks User Manual
50
PrimeLog Program dialog (Channel Information tab)
The Channel drop-down list on the Channel Information tab lists the
channels available on the selected logger. Two channel types are available:
Analog and Digital. The selected channel type determines the categories of
logging that are available and the settings/parameters that display on the tab.
For example, a user can log data from a bi-directional digital flow meter by
selecting the appropriate meter type from the Digital 1a options. A user can log
uni-directional flows using two meters at independent locations in a single flow
channel by selecting the meters separately from the Digital 1a and Digital 1b
options.
Digital Screen Description
Four types of logging are available through PrimeLog:
 Flow Meter This involves standard, periodic logging. The other three
are event-driven, recording the times at which pulses occur rather than
the number of pulses.
 Meter Type Select the type of flow meter. This is critical to
ensuring the proper powering of the meter.
 FCal Enter/select the amount per pulse, and then select the units
upon which the amount is based. Refer to the Chapter 9, Appendix
– Meter Scaling Tables, beginning on page 75, for the proper
amount to enter.