User Manual

IF1000series 6
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
2.2 OperationLocation
Thisdeviceisdesignedforuseinindustry.Youmustensurecompliancewiththespecifiedenvironmental
conditions.Usingthedeviceinnon‐specifiedenvironments,e.g.onboardshiporinareascontainingexplosive
vapours,gasesorgasmixes,aswellasinextremeheights,isprohibited

 Warning:
Fortheprevention
ofwatercondensateaccumulation,theunitshouldbeturnedONonly
whenitreachesambienttemperature.Thisparticularlyapplieswhentheunitissubjectto
extremetemperaturefluctuationsand/orvariations.
Avoidoverheatingduringunitoperations;theunitmustnotbeexposedtodirect
sunlightoranyotherdirectlightor
heatsources.

2.3 DamageCausedByImproperUse
Thisdevicemustimmediatelybeshutdownandprotectedfromanyaccidentalcommissioningiftheoperating
systemshowsanyobviousdamagecausedby,forexample,improperoperatingorstorageconditions,orby
improperuseorhandling.
2.4 Warranty/Repair
Duringthewarrantyperiod,anyrepairmustonlybecarriedoutbythemanufacturerorbyapersonauthorised
bythemanufacturer.
