User Manual

IPC1300 11
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
3.4 Mountingprocedure
Usethedrillingtemplatetodrillholesaccordingthemountingillustrationinthecontrolpanelwiththespecified
threading.Inserttheupperscrewshalfwayintothecontrolpanelandhangthedeviceonthemountinglinks.
Tightenthescrewsandinserttherestofthescrews.

 Warning:
Thedevice
mustbeswitchedoffbeforeconnectingordisconnectinganycablesinorderto
preventdamagetotheelectronics!
Thedevicemayonlybeswitchedonafteracclimatisingtotheambienttemperaturein
ordertoavoidcondensateaccumulation.Makesuretomeetthepermissiblevoltage
requirementsforthisdevice.
Afterswitching
offandbeforeswitchingonyoumustwaitforatleast5seconds.

 Note:
Thedeviceisconnectedtothepowersupplyusingaleadoutterminalwithascrew
connection.Agroundconnectiondoesnothavetobemade,becausethe
groundingconductorofthedeviceplugorsupplyconnectionservesthispurpose.If
additionalgroundingconductorsareattachedtoagrounding
screw,awire
diameterofatleast2.5mm²isspecified.

