User Manual

IPC1300 8
©ads‐tecGmbH•Raiffeisenstr.14•70771Leinfelden‐Echterdingen
3 Mounting
3.1 Mountingoptions
The device is intended for installation on control panels. If the device is mounted somewhere else, then the
requiredambientconditionsshouldalwaysbeprovided.

 Warning:
Thedevicemustbeswitchedoffbeforeconnectingordisconnectinganycablesinorderto
preventdamagetotheelectronics!
Thedevicemayonly
beswitchedonafteracclimatisingtotheambienttemperaturein
ordertoavoidcondensateaccumulation.Makesuretomeetthepermissiblevoltage
requirementsforthisdevice.
Afterswitchingoffandbeforeswitchingonyoumustwaitforatleast5seconds.

 Note:
Whenselectingthemountinghousing,theoverallperformanceofthesystem
includingbuilt‐incardshastobeobserved.Thehousinghastobecalculated
correctly,thatthemax.permissibleambienttemperatureisnotexceeded.
