Technical data

11IT Infrastructure IF1000 series technical data
203 41
154
41
Event log/remote syslog Yes (Event log on NV-RAM as an option)
Filter wizard Predefined filter rulesets are used
Guides you through the creation of new filter sets
Max. number of rules Only restricted by memory size
Layer 2 filter function Yes
Layer 3 filter function Yes
Rulesets for individual VPN
connections
Yes
Stateful inspection Yes
Miscellaneous 1:1 NAT/network mapping In extended routing mode, up to four identical IP subnets can be connected
and mapped to a corresponding global address range, even in combination
with VPNs
SNMP SNMPv1, v2, v3 read/write
Routing Static, RIPv2 and OSPF
External configuration profiles Yes
Firmware update server (external) Yes
NTP client Yes, 3 servers can be configured
DHCP server/DHCP relay Yes
VLAN support Yes
Bandwidth management Yes
STP (spanning tree protocol) Yes
Modbus TCP Yes, with predefined registers
Client monitoring Yes (ICMP)
IDA light Centralised management tool for configuration and monitoring of all
ads-tec firewalls in the network
Certificate enrolment Automatic distribution and validity date renewal of device certificates for
VPN authentication by using SCEP
Options
Software OpenVPN WebManager Web based administration of IF1000 OpenVPN connections
Hardware NVRAM 128 KB NVRAM for fail-proof storage of the event log (IF1110)
Fibreoptic connection 100BASE-FX (MTRJ) LAN IN (IF1200) multi mode fibreoptic connection
SIM card The entire configuration is stored on ads-tec memory cards.
This allows simple device replacement.
The device reads the configuration automatically.