Technical data

RAP and RAC product benefits
4
Single or Dual Access Point
Communication on several channels
• Up to two WLAN cards per device are
available for simultaneous provision
of 802.11b/g and 802.11a/h networks,
each time with the maximum trans-
mission rate
• Use in dual radio WDS systems in order
to achieve higher transmission rates in
distributed wireless networks
Network connection
Glass-fibre or
copper
• A version including a MTRJ fibreoptic
connection is available for areas with
strong EMC influence and with long
distance connections
Power supply
Integrated and rich
in versions
• 24V DC
• 115/230V AC
• PoE Power over Ethernet
SIM card for simple backup
Plug & play configuration
• The entire configuration of RAPs and RACs can be stored on a
SIM-card available as an option
• The device automatically reads the SIM card contents and
starts the device with this configuration
• Devices can quickly and cost efficiently be replaced without
any specialists
100% suitability for industry use
IP 65
protected
• Use of standard cables in a protected
service duct
• Alternatively, the RAP device is also
available in an access client version
(RAC)
• The RAC1000 series offers an inte
-
grated 4-port switch as an additional
option
• Mounting adapter installed in the rear
for simple and secure installation
• Each RAP access point can also be
operated as a pure access client by
simply changing the mode setting
Antennas
For best results in 2.4
and 5 GHz band
• WLAN antennas for the 2.4 and 5 GHz
band and suitable for industrial use
are supplied with the device, ex factory
• Two R-SMA connections are available
per WLAN module, which can be
equipped with alternative antennas
• The individual features of these
antennas can be saved in the web
interface