User manual

Tablet PCs TT13

6.2 TT13 HDD PROTECTION

Note:

The application is attended to protect the read-/write cycle of the hard disk. Via a

sensor, sudden kinetic changes or agitation is being recognized. To prevent

damage and possible data loss, the reading head will be placed to a neutral

position.

The application is used to control the HDD Protection drivers and services. It will start

minimized and adds the tray bar a icon.

Illustration1: Traybar Icon

Via the icon, the current status of the HDD Protection is being shown. If the HDD is

blocked, the following status is shown.

Illustration2: Traybar icon with activated HDD Protection

Double clicking or using the context menu will maximize the application.

The configuration application (Illustration3) enables the power on /off of the icon the

traybar. Additionally the durability of protection after, a agitation, can be configured in ms at

the “HDD Protection Time”. The sensibility of protection can be changed by four steps.

These steps are: High, Middle, Low and Inactive. The protection can be activated manually

and stays activated until the user is deactivating the protection.

Illustration3: Configuration surface