User Manual

Below is a picture of the dialog box that will notify you that Windows has

detected your new hardware.

Step 1

Windows will then ask you to insert the Windows 98 CD-ROM. Once you

have inserted the CD-ROM into the CD drive, left mouse click one time on the

button that says “OK.”

Step 2

When you initially connect your USB Port, Windows will automatically

detect you have a new device and thus request the Windows 98 CD. To follow

are step by step instructions on how to install the software drivers.

Installing the Software Drivers (For Windows 98/ME/2000)

Note:

For Windows ME/2000, it may self install with out your interven-

tion. You can verify if the card is installed properly by checking the Device

Manager. The card will appear under the category “Universal Serial Bus

Controller”. It should have an entry for a “USB Open Host Controller” and

the “USB Root hub”