English Watch and Record TV shows on CD or DVD Hardware User's Guide ADS Tech Instant TV Deluxe PCI Instant TV Deluxe PCI website: www.adstech.com Support: www.adstech.com/support/support.
Table of Contents Quick Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 IR Blaster Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Service and Warranty. . . . . . . . . . . . . . .
Instant TV Deluxe (PCI) Quick Installation Guide: This Quick Installation Guide should be used as a reference guide only. It is highly recommended that you read the complete Instant TV Deluxe Manual before using this product to help ensure you get the most of your Instant TV Deluxe. Follow these instructions when using the Instant TV Deluxe for the first time. Instant TV Deluxe Hardware Installation: 1) Insert your Instant TV Deluxe into an open PCI slot on your motherboard.
Step by Step Hardware Installation: 1. Turn your computer off. 4. Insert the Instant TV Deluxe PCI into an open PCI slot on the motherboard and screw in tightly. TURN OFF 2. Take the case off of your computer to have access to the PCI slot of your motherboard. 5. Put the case of your computer back on. 6. Press the power button to turn the computer on to start the installation of the drivers. 3. Take the Instant TV Deluxe PCI from the packaging.
Step by Step Instant TV Deluxe (PCI) Driver Installation: Step 1: After you have intalled the Instant TV Deluxe PCI into an open PCI slot, turn on your computer. Step 2: Place the provided Instant TV Deluxe CD into your CD ROM drive and wait for the autorun screen to come up. Once the Autorun sceen has launched click “ Install Drivers” and follow the on-screen instructions. Step 3: Click “Start” to begin the installation of the drivers.
IR Blaster The IR Blaster is an infra-red transmitter and receiver. As an IR Receiver the IR Blaster acts as a receiver for the Instant TV Deluxe remote control. As an IR Blaster the device gives you the power to control external TV receiver devices. The IR Blaster is a very powerful addition to a TV Capture card. Today many people do not receive TV signals over conventional analog cable systems. Many households today get TV content delivered via digital cable or satellite TV receivers.
IR Blaster and the Instant TV Deluxe Remote Once you have programmed the IR Blaster to send TV channel changing codes to your set top box, you can use the Instant TV Remote in conjunction with the IR Blaster to control your set top box. 1) 2) Point the Instant TV Deluxe remote at the IR Blaster – press 4 and Enter – the IR Blaster will receive the code and then transmit the correct code to change to channel 4 on your set top box.
Step 3: You are now finished with the hardware driver install of the ADS IR Blaster, click “Finish” to finalize the installation. This USB device creates a wireless, infrared connection between your cable box or satellite receiver and the PC running Beyond TV. The USB IR Blaster,” allows any USB-equipped PC to exchange infrared signals with common audio/video equipment.
Step 2: You will now see the Instant FM Setup screen, follow the installation instructions and hit “Next”. Step 3: Choose the destination where you want to install the software. To proceed with the installation click “Next”. Step 4: The setup will now add program icons to the Program Folder, click “Next” to continue. Step 5: You are now finished with the Instant FM installation, click “Finish” to finalize the install.
ADS Instant FM Functions Frequency Next Channel Adjust Frequency up and down Saved station channels Enter Recall last channel Volume up and down Mute Setup Memo Channel Record Play your recorded file -/+ f Allows you to adjust the Frequency up and down g Skip back and forth from channel to channel 0-9 Preset channel buttons To toggle between the current channel and the previous channel Press the Enter button after inputting a channel Adjust volume up and down Allow you to name your stations that
To mute/unmute the volume To start recording your radio tunes To bring up the recorded files you want to playback To stop the recording or playback of your recorded files Rewind the playback Fast Forward the playback To program your favorite stations to each channel Step 1: Click on the “Setup” button. Step 2: At the top left hand corner of the Setup page click on Channel tab.
Service and Warranty: If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual. Your primary source for information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or replacement, contact your dealer for on-site repair service.
Technical Support - 562.926.4338 North America Support Hours: Mon-Fri: 8am - 5pm, PST Support: www.adstech.com/support/support.asp www.adstech.com European Technical Support: +353.61.702042 North America Support Hours Phone: 562-926-4338 M-F: 8:00 am - 5:00 pm, PST www.adstech.com Support: www.adstech.com/support/support.asp Southern Europe Office 51-55 rue Hoche 94200 Ivry sur Seine, France Phone. +33 1.43.90.19.20 Fax. +33 1.46.58.67.06 Part no. 305-521 www.adstech.