PYRO Digital Video Users Guide

Step 5

Windows will now inform you it is ready

to install your new driver. Verify that the

path is the same as the picture to the

left. It should read “C:\WINDOWS\INF\

1394.INF”

Now click the “Next” button.

Step 6

Congratulations! You are now done with

the driver installation. All that is needed

from you now is to click the “Finish” but-

ton.

2.) CAMCORDER DRIVER INSTALLATION

1. DO NOT PLUG YOUR CAMCORDER INTO THE PYRO

BOARD UNTIL YOU HAVE INSTALLED THE CAMCORDER

DRIVERS from PYRO CD #1.

2. Insert the PYRO 1394DV CD into your CD-ROM drive.

INSTALL DRIVERS. The driver install will automatically install

the correct version drivers to match your operating system.

THE DRIVERS WILL INSTALL ONLY IF YOUR PYRO CARD IS

INSTALLED FIRST.

3. If you have Windows ME or Windows 2000 it may not be

necessary to install any camcorder drivers.