USB Instant DVD User's Guide

27
CAPTURE WIZARD STEP-BY -STEP
Menu Options: Advanced
There are several advanced features accessible through this menu.
Audio - In the Wizard screens, if you selected MPEG-2 for the video capture format, you were given
the opportunity to select 48 KHz MPEG-1 Layer 2 or 48 KHz LPCM audio format.
The Advanced Audio Options allows you to confirm your settings and make any changes.
Enable 48 KHZ Capture - MPEG-1 Layer 2:
Check this box if you wish to capture at 48 KHz audio. This is required to create a DVD compliant
video file.
Use 48KHz, but Capture in PCM format Check this box additionally to capture audio in the PCM
format. To capture 48KHz PCM audio, both boxes must be checked.
The CapWiz interface will display the audio setting during capture and preview as 48 KHz for 48 KHz
MPEG-1 Layer 2 and 48 KHz PCM for PCM audio capture.
SVCD and VCD video use 44.1 KHz MPEG-1 layer 2 audio format automatically.
Encoding Bitrate - You can select the audio encoding bitrate for MPEG-1 Layer 2 audio. The audio
bitrate for PCM audio is always 1,536 kbps or approximately 11.52 MB/minute.
Select the audio bit rate you desire for VCD, SVCD or DVD video. These bit rates are measured in
kilo bits per second (kbps) The standard for VCD and SVCD is 224 kbps, but you can select a range
from 64 kbps to 384 kbps.
Playback
This will allow you to playback captured video at any standard playback resolution regardless of the
capture resolution:
1.) Click Options at the top of the screen.
2.) Click Advanced
3.) Click Playback Options
4.) Select the desired playback resolution.
5.) If you select Full Screen, then you can manually drag the playback window to any size.
CapWiz manual.p65 6/4/2002, 12:22 PM27