Install guide
instaLLation checKList - 2 OF 2
checKList
19 Close all doors.
20 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
21 Wait for the vehicle to start.
Question 8: Is the vehicle equipped with Comfort Access System ?
YES: Touch exterior driver door handle to unlock door using Comfort Access System. Within 45 seconds, go to step 22.
NO: Press UNLOCK button once [1x] on the OEM keyfob. Within 45 seconds, go to step 22.
22 Open driver door.
Question 9: Does the vehicle shut down?
YES: For Z4, X5, X6: Go to step 25.
YES: For 1, 3, 5, 6, X1: The module does NOT detect the parking brake signal or the unlock signal from the vehicle communication network. Call technical support.
NO: For Z4, X5, X6: The module does NOT detect the parking brake signal correctly from the vehicle communication network. Call technical support.
NO: For 1, 3, 5, 6, X1: Go to step 23.
23 Press and release brake pedal.
24 Push vehicle start button once [1x] to shut down the vehicle.
25 Installation checklist completed.
www.flashlogic.comAutomotive Data Solutions Inc. © 2013
Page 8 oF 15
• 20130523
FLCIDSRSBM1EN