Quick Installation Guide

ADT Video Doorbell

ADT PULSE

ENROLLMENT

DBC845 Wireless Doorbell Camera Installation

14.

Factory Reset Instructions:

A. Press the doorbell button to wake up the device

B. If already enrolled, the device will “ding-dong”

C. If not already enrolled, the device will go into WPS mode

and blink green

D. Press and hold the reset button on the back until you hear a

ring (about 10 seconds), then release to start the reset

process

E. If you don’t hear the ring, press the doorbell button again to

ensure it is awake and perform step “D” again

F. The unit may need to be charged via USB is the battery is

too low to perform the factory reset