Quick Installation Guide
Table Of Contents
ADT Video Doorbell
Quick Installation Guide
ADT PULSE
ENROLLAMENT
8
DBC845 Wireless Doorbell Camera Installation
3 ADT Pulse Enrollment
This section provides instructions for wirelessly enrolling the DBC845
Doorbell Camera into the ADT Pulse network. This process uses Wi-
Fi Protected Setup (WPS) with PIN method to wirelessly enroll the
HD Camera to gateway via the ADT Pulse portal or Installer App.
Using WPS with PIN
1.
Power up the camera and wait for the LED to turn flashing red, as
described in the previous chapter.
2.
Launch web browser and log into the Pulse portal or installer app.
3.
Enter the
Manage Devices
screen using one of the following methods.
•
For the Pulse portal, select the
System
tab and click
Manage
Devices
.
•
For Installer app, click the
Pulse Devices
link.
4.
In
Manage
Devices
screen, click
Cameras
.
Figure 3-1 Clicking "Cameras" Button