USER MANUAL ICE MAKER Model: HZB-15/BF HZB-22/BF INSTRUCTION MANUAL It is important that you read these instructions before using your portable ice maker and we strongly recommend that you keep them in a safe place for future reference.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS……………………………………………….…2 PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS…………………………………………………………………….3 GETTING TO KNOW YOUR UNIT………………………………………………………..5 OPERATING PROCEDURES & MAINTENANCE………………………………………6 UNPACKING YOUR ICE MAKER………………….…………………………………………...6 CONNECTING YOUR ICE MAKER……………….……….…………………………………...7 CLEANING AND MAINTAINING YOUR ICE MAKER….………………………………………..7 USING YOUR ICE MAKER……………….……..………………………………………...8 TROUBLESHOOTING…………………………….
IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages manual and your appliance. Always read and obey all safety messages. This is the safety alert symbol: ! All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”. DANGER WARNING These words mean: You can be killed or seriously injured if you don’t immediate follow instructions.
PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this,or any other appliance with a damaged cord. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
CAUTION – Risk Of Fire Or Explosion. Dispose Of Property In Accordance With Federal Or Local Regulations. Flammable Refrigerant Used . CAUTION-Risk Of Fire Or Explosion Due To Puncture Of Refrigerant Tubing;Follow Handling Instructions Carefully. Flammable Refrigerant Used. The ice maker should be installed in accordance with the safety standard for Refrigeration Systems, ASHRAE15. The ice maker shall not be installed in corridors or hallways of public buildings.
GETTING TO KNOW YOUR UNIT UNIT SMART CORE FOR THE WATER BOTTLE BUTTON TO POP UP THE WATER FAUCET OPERATION PANEL ICE CUBE BASKET Can be pulled out AIR OUTLET COLD WATER FAUCET (Need to be pop up by the button near the operation panel) WATER DRAIN CAP OPERATION PANEL Water Dispensing Button SELECT Button Use to select the desired size of the ice-cube.
OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER 1. Remove the exterior and interior packaging. Check that ice scoop is included. If any parts are missing, please contact our customer service. 2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it . 3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface.
CONNECTING YOUR ICE MAKER DANGER * Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged please call our customer service. 1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electric shock. 2. Plug your appliance into an exclusive, properly installed, grounded wall outlet.
USING YOUR ICE MAKER MAKING THE ICE -CUBE 1. Select the size of the ice cube by pressing the “Select” button. If the room temperature is lower than 60℉, it is recommended to select the small or medium ice sign button in order to avoid ice sticking together. 2. Press “Power” on the control panel to begin the ice making cycle. 3. The ice making cycle lasts 6 to 12 minutes, depending on the size of the ice cube selection. 4.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Stop the ice maker, replace with a new bottle full of water, and then restart it. “Water” indicator is on. Lack of Water. “Ice” indicator is on. The ice basket is full of the Pull the ice basket and empty it. ice-cube. The ice cycle is too long. Ice cubes stick together. Stop the ice maker, and restart it when the ice blocks melt. Select the small ice button. Change the water in the inner Water temperature in inner Tank.
CIRCUIT DIAGRAM 10