Quick Start Guide
Welcome to Blue by ADT
You’ve made a great decision to help protect your family and home with the purchase
of your Blue by ADT Keypad. The Blue Keypad is a convenient in-home controller for
your security system.
Use it to arm your system when you leave and to disarm your system when you come
home. The keypad includes a Panic button to trigger the Panic Alarm in case of an
emergency. It also connects to your Blue by ADT Smart Home Hub and sends you
an alert if your smoke and/or CO detector alarms. The smoke/CO detector alarm
requires the keypad to have AC power connected. Customize your keypad’s settings
from the Blue by ADT app at any time.
Box includes:
• Keypad
• 4 AAA batteries
• Tabletop stand
• Mounting hardware
• Power supply
Before you get started
You will need:
• Blue by ADT Smart Home Hub
• Blue by ADT app on the latest iOS or Android OS
• Phillips screwdriver or a drill with a Phillips driver bit (optional)
• Power drill with drill bits for pilot holes (optional)
Setting up your Blue by ADT Keypad
Getting started is simple. Just follow these steps:
1. Remove the keypad and power supply from the box.
2. Remove the back cover of the keypad to access the battery slots
and mounting holes.
3. Plug the power cord into the back of the keypad. Then, plug the keypad into an
outlet for the best experience. Alternatively, use the device with batteries if you
don’t have access to a power outlet nearby.
a. Insert the batteries.
Note: The keypad can run on AC power or batteries. If you are using AC power
with inserted batteries, the batteries will act as a back-up power source.
4. Download the iOS or Android app by visiting www.BluebyADT.com/apps
5. Open the app to create an account or log in to your existing account.
6. Select Menu > Devices > (+) Add Security Device and select Blue Keypad.
7. Follow the in-app screens to pair your device to the Blue Smart Home Hub.
8. Set up the device in your desired location.
Pairing
To pair your Blue by ADT Keypad with the Blue Smart Home Hub, launch your
Blue by ADT app. Once logged in, select Menu > Devices > (+) Add Security Device >
Blue Keypad, and follow the in-app setup help to pair with your system.
Note: The keypad and devices in a Blue by ADT system may be precongured. If so,
they will be pre-paired to your system and can be added by simply powering the
devices on.