Quick Start Guide
Mounting your Blue by ADT Keypad
Note: The Blue by ADT Keypad should be located by an
entrance in your home, like your front door or garage door.
The keypad can either be mounted onto the wall or placed
on a tabletop.
1. To mount the keypad on a wall: Secure the keypad to
the wall by removing the back panel of the device and
screwing the back panel into the wall using the included
hardware. Once the back panel is mounted to the wall,
press the keypad into place.
Note: If you’re using the power cord, make sure the cord
is attached to the keypad before connecting the device
onto the back panel and plugging it into a power source.
2. To set up the keypad on a table:
a. Remove the back panel of your keypad to plug
the power cord into the device. Replace the back
panel.
b. Secure the table stand to the keypad by inserting
the stand posts into the screw holes on the back
panel of the keypad. Push the stand upward to
lock it into place.
Note: Make sure the stand is oriented as shown
to ensure it is propped up correctly.
Users & User Codes
Blue by ADT allows for multiple User Codes, which will enable you to keep track of
who arms and disarms your system. You can manage users and User Codes in the
Blue by ADT app or web portal, not on the keypad. Log in, go to Menu > Users,
and select User Name to view code details.
• Master User Code: You will only have one 4-digit Master User Code, which
gives you complete access to your entire system. Protect this code, and do
not share it with others.
• Users: Invite your trusted friends and family and keep track of who arms
and disarms your system. Users will be invited via email, and they can set
their login password, security question, and manage their notications
under My prole.
As the Master User, you may invite any of the following user types to your system:
1. Admin Users get full access to all platforms and functionalities.
2. Standard Users have access to monitoring, controlling, and limited
settings management.
As the Master User, you may also add any of the following user types to your system:
1. Basic Users can only arm/disarm.
2. Duress User is a code to disarm the system and notify the monitoring center.
You may only have one duress code, which is shared by all, to trigger a duress
alert to the monitoring center if professionally monitored.
Learn more about Users by visiting www.BluebyADT.com/support