Quick Start Guide

Disarmed (ready to arm)
Entry delay, exit delay
Armed (any mode)
Alarm, Panic
A device is faulted, lost,
or has a low battery
Boot mode (device is restarting)
Downloading rmware
LED light patterns
Pairing state LED behavior
Solid green
Solid blue
Blinking blue
Blinking blue
Blinking red
Disarmed (not ready to arm)
Blinking green
Blinking yellow
Alternating white and blue
*The LED light behavior may vary based on power and user settings managed from the
Blue by ADT app or web portal.
Factory resetting your Blue Keypad
To remove a keypad from your Blue by ADT account, open the Blue by ADT app or
web portal, select Menu > Devices, and then nd the name of your keypad. Choose
Remove Device.
To factory reset your keypad:
• Hold * and 3 together on the keypad for ve seconds until the UTILITIES
menu appears.
• Press 5 for DEREGISTER KEYPAD option.
• Press # to conrm.
• Press * to continue.
Important safety information
1. Read and keep these instructions.
2. Clean only with a dry cloth.
3. Set up in accordance with the manufacturer’s instructions.
4. Do not set up near any heat sources such as radiators, heat registers, stoves, or other devices (including
ampliers) that produce heat.
5. Only use attachments/accessories specied by the manufacturer.
6. The device should not be exposed to dripping or splashing water. Items lled with liquids, such as vases or
hoses, should not be placed on or near the device.
7. Do not store batteries with hazardous or combustible materials. Batteries can explode, catch re, and/or
cause burns if disassembled, punctured, cut, crushed, short-circuited, incinerated, recharged (disposable
cells), or exposed to water, re, or high temperatures.
8. Keep batteries away from children.
9. Store spare batteries in a cool, dry, and ventilated area.
LED reference guide
Your Blue Keypad has an LED light on the front of the unit. This quick reference guide
will help you understand your device’s status.