Quick Start Guide

Arming your system

Blue by ADT provides a variety of options for arming and disarming your system.

Depending on your needs, you may choose one of three different arming modes:

ARM-STAY: Press the Stay button on top of the hub, then enter your user code

ARM-AWAY: Press the Away button on top of the hub, then enter your user code

INSTANT ARMING: Press the Night button on top of the hub, then enter your user code

DISARM: Press Off button on top of the hub, then enter your user code

Note: The exit and entry delays are designed to give you enough time to leave or enter your home without setting off a

false alarm.

You can arm and disarm your system using various devices. The following instructions will explain how to arm and

disarm your system using each one.

Blue by ADT mobile app and web portal:

• ARM-STAY: Press the arming icon (shield) and select STAY (the house with a dot inside the house), then

enter your user code

• ARM-AWAY: Press the arming icon (shield) and select AWAY (the house with a dot outside the house), then

enter your user code

• INSTANT ARMING: Press the arming icon (shield) and Select NIGHT (the lightning bolt inside the house), then

enter your user code

• DISARM: Press OFF (shield with keyhole), then enter your user code

Tip:

Make sure all windows and doors are closed before arming the system. If a sensor is open when you

are trying to arm the system, you may be prompted to bypass the sensor. You can either close the door

or window and try to arm again, or bypass the sensor, and it will not be monitored until the next time

the system is armed.