Quick Start Guide

Setting up your hub
Your hub is the most important piece in your home security system. The hub requires a Wi-Fi/internet connection.
Please keep in mind that the base needs to be free from metal objects and appliances that generate heat. Avoid setting
the hub directly on or near any major appliances, kitchen appliances, heaters, entertainment consoles, cable boxes,
internet routers, televisions, and stereos.
Once you have determined the ideal location for your hub, you may begin setup.
1. Open the box that says “Smart Home Hub”.
2. Unpack the contents and plug the power cord into the
hub. Then plug the power cord into the closest power
outlet.
3. While your hub is starting up, open up the Blue by ADT
app on your mobile device and log in to your account.
4. Follow the in-app setup instructions to connect your
Hub bottom
base via Wi-Fi.
5. Once your hub powers on, it will begin to communicate
with our security network. When the top LED light
on your base is solid green or flashing yellow, you can
proceed to the next step.
Power Ethernet
If the top LED on your base is not solid green or flashing yellow within 10 minutes, please contact Customer Support for
additional assistance at 877-725-3838.
7