Quick Installation Guide

ADT OC845 FHD Outdoor Camera

OC845 Outdoor FHD Camera Installation Guide

• Connect the power cable into the back of the camera.

• Insert the grommet between the camera and the power input cover.

Caution: Ensure that the grommet is positioned properly to

prevent water from entering the camera power input.

• At the location of the power source, connect the power cable to the power

adapter:

• Screw the red wire onto the positive (+) terminal of the power adapter, on

the left side.

• Screw the black wire onto the negative (–) terminal of the power adapter,

on the right side.

• Adjust the camera to the desired position and secure it firmly.

• Verify that the camera is active on the wireless network and is recognized

by the platform.

Caution: To avoid damaging the camera, be sure to observe proper

polarity. Although the + and – terminals are marked on the power

adapter, they are white on white and may be difficult to see.