Quick Installation Guide

ADT OC845 FHD Outdoor Camera

OC845 Outdoor FHD Camera Installation Guide

1 Introduction

This section provides information about the OC845 Outdoor Day/Night FHD

Camera's features, components and capabilities.

1.1 Feature Overview

The OC845 is an Outdoor day/night camera with FHD resolution and 802.11ac

Wi-Fi connectivity intended for use with both ADT Control® and Pulse®.

• Standalone Design. The camera is a standalone system with built-in CPU

and video encoder. It requires only a power source and a connection to the

network (Customer router for Control

or ADT Pulse gateway).

• Dual Video Support. The OC845 supports H.264 and MJEPG video

compression.

• Day/Night Switch. With the day/night switching feature, you can view and

record images even at night.

• IR LED Support. The two infrared LEDs can provide illumination for up to 5

meters/16 feet, providing superior video quality under low-light conditions.

• PIR (Passive Infrared Sensor) Support. The embedded PIR Sensor senses

infrared light radiating from human bodies in its field of view.

• Built-in Heater. The built-in heater ensures that the camera will continue to

operate even in extremely cold outdoor climates. The heater turns on when

the temperature falls below 42°F (6°C).

• 802.11ac Support. The 802.11ac standard provides backward

compatibility with the 802.11b, g and n standards.

• Supports both Soft AP and WPS. Soft AP connectivity is used on the Control

platform. Wi-Fi Protected Setup (WPS) uses a push button to connect to the

Pulse platform.

• Wireless Network. The OC845 is connected to the network wirelessly.

• Two-Way Audio. The OC845 has a speaker and microphone for two-way

conversations and echo cancellation.