Quick Installation Guide

ADT OC845 FHD Outdoor Camera

OC845 Outdoor FHD Camera Installation Guide

4 ADT Pulse Enrollment

This section provides instructions for wirelessly enrolling the OC845 Outdoor

FHD Camera into the ADT Pulse network. This process uses the Wi-Fi

Protected Setup (WPS) with PIN method to wirelessly enroll the FHD Camera

to the gateway via the ADT Pulse Portal or TS Installer App.

4.1 Using WPS PIN to Enroll Camera

• Set up the camera as described in Section 2.

• Launch an Internet browser and log in to the Pulse portal or TS Installer app.

• Enter the Manage Devices screen using one of these methods:

- For Pulse portal, select the System Tab and click Manage Devices.

- For TS Installer app, click the Pulse Devices link. The Manage

Devices screen will display.

• In the Manage Devices screen, click Cameras.

• Click the Add Using WPS button located at the bottom of the screen.