Quick Installation Guide

SD-SRN09 Quick Installation Guide

Indoor battery Siren is a DECT/ULE protocol device and ability to communicate with ADT base, Siren states included Alarm,

Tamper, Low battery & Critical low battery

Specification

Frequency

1.9 GHz

Battery Type

CR123A * 2

RF Transmission Range

Outdoor: 100 Meters

Operating Temperature

0° C to 55° C (32° - 131°F)

Storage Temperature

-10° C to 60° C (14° - 140°F)

Battery Life

5 Years (Assume Siren alarm x 2 / per year, 1 minute each @25°C)

Dimensions (W x L x H)

Diameter: 105mm*25mm

Detect Range

Distance: Max. 10M (±1M) @25°C

PAGE 1
SD-SRN09 Quick Installation Guide Indoor battery Siren is a DECT/ULE protocol device and ability to communicate with ADT base, Siren states included Alarm, Tamper, Low battery & Critical low battery Specification Frequency 1.
PAGE 2
Package Contents 2
PAGE 3
Intallation 1. Unlock and remove mounting plate.
PAGE 4
2. Insert CR123A Battery into Siren 3. The Siren of LED indicator will be blinking for 90sec while attempting to pair with the gateway or base station..
PAGE 5
Operation 4 1.
PAGE 6
2. Buzzer 3. Test Button 4. Tamper • • • When the battery is installed, the Blue LED will be blinking for 90 seconds which indicates paring process is on going. If pairing succces, Blue LED will be solid on for 3 seconds.If paring fail, Red LED will be solid on for 3 seconds. If paring fail, press “Test Botton” for 5 second to restart paring process. • If Siren needs factory reset, press “Test Botton” for 10 second to Reset and restart paring process.
PAGE 7
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.