User's Guide

Appendix B - About Wireless LANs
5
Rear/Side Panel
P
ower Plug Connect the power plug to a wall socket.
Reset This button has two (2) functions:
• Reboot. When pressed and released, the Camera Hub will reboot
(restart).
• Clear All Data. This button can also be used to clear ALL dat
a
a
nd restore ALL settings to the factory default values.
To Clear All Date and restore the factory default values:
1. Power On.
2. Keep holding the Reset Button down for 3 seconds.
 Release the Reset Button. The Camera Hub is now using the factory
default values.
WPS Button
Push the WPS button more than 3 seconds to trigger WPS pairing
process with voice (PBC mode).
 During the pairing process, the LAN LED will fast blink until WiFi is
successfully connected.