User's Guide

FCC ID: P27SCB1R0
6
Chapter 2
Initial Installation
This Chapter covers the device installation of the WiFi extender.
Requirements
• None of cables required for the installation.
Procedure
1. Choose an Installation Site
Select a suitable place to install the Camera Hub.
2. Power Up
Place the extender near the existing router. Provide the power to the extender so plug it in-
to a wall socket or a power strip. The LEDs light will be ON and make a welcome sound to
notice the extender is boot up successfully.
3. Check the LEDs
• All 4 LEDs shall be ON when the power is supplied to the extender.
• The Power LED should be ON
• The LAN LED should be ON
• The WAN LED should be ON
• The Device LED should be ON
2