Programming instructions

ADT-CNC4620 Programming Manual
- 34 -
O9001
M03 S500T0101
G00 X70 Z2
G90X56Z-60F500
X52
X48
X44
X40
X36
X32
X30
M30
%
3.5.2. Thread cutting cycle G92
Instruction format: G92 X/U Z/W R_ F_ P__ D__ V__;
X/U: thread end X axis coordinates;
Z/W: thread end Z axis coordinates;
F: thread pitch
R: thread slope; radial coordinate difference (radius) between cutting start and cutting
end; if R and U do not have same sign, |R| ≤ |U/2| (diameter programming) or |R| ≤
|U|(radius programming) is required. If R isn’t specified, it is straight thread
P, D, V: same to G32 instruction function, but the value of V in G92 is unsigned; the
system retreats the tool according to the direction of the start point automatically,
and G32 needs to check the retreating direction of the specified V sign
Thread cutting
Quick feeding
Z axis
X axis